Connecting the Display

Connecting with the PC

1.

Before setting up the monitor, ensure that the power to the monitor, the computer

2.

system, and other attached devices is turned off.

Connect signal input cable 1 and power cord 2 in order, then tighten the screw

of the signal cable.

AConnect DVI-D(Digital signal) Cable

BConnect D-sub(Analog signal) Cable

CConnect Audio Cable

NOTE

This is a simplified representation of the rear view.

This rear view represents a general model; your display may differ from the view as shown.

Varies according to model.

Wall-outlet type

When using a D-Sub signal input cable connector for Macintosh

Mac adapter : For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row connector.

Connect the signal input cable and tighten it up by turning in the direction of the arrow as shown in the figure.

DVI-D (This feature is not available in all countries.)

12

Page 13
Image 13
LG Electronics E2211PU owner manual Connecting with the PC, Varies according to model