LG Electronics LW1804ER, HB1803R, LWP1830WAL, LWP1820PDL, LWP1820PEL, LW1500PR Capacitor, Power Cord

9.Capacitor

1.Remove the control box. (Refer to section 3)

2.Open the top cover from the control box. (See Figure 25)

3.Pull out the capacitor from the control box.

4.Disconnect all the leads of capacitor terminals.

5.Re-install the components by referring to the removal procedure, above.

Disassembly

	C	C
	ool OOL			FAN
Energy					DRY		H
Saver		IN						EAT	DEF
				AN
				F
	Fa		DOOR		DE					ROST
	n					SIRED				F1L
										SMER
D										FE2N OW
										F3HAVEDGY
	ry									AIIGHR	˚
			T						PURYR
										A FIER	C
				imer						RE UTO
M										START
	E							TEMP
	OD
			T
				IM	ER
									FA
								SP		N
										EED	P
											O
											W
											ER

Figure 5

10.Power Cord

1.Remove the control box. (Refer to section 3)

2.Open the top cover from the control box. (Refer to section 9)

3.Disconnect the front panel from the control box. (See Figure 26)

4.Disconnect two leads from the capacitor and relay.

5.Pull out the power cord.

6.Re-install the component by referring to the above removal procedure, above.

(Use only one ground-marked hole for ground connection.)

7.If the supply cord of this appliance is damaged, it must be replaced by the special cord.

(The special cord means the cord which has the same specification marked on the supply cord attached at the unit.)

E Cool
Snergay
ver
Fan
Dry	˚C
Timer
MODE	TEMP
T
IMER	FAN
	SPEED
	POWER

Figure 26

Service Manual 19