How to use
Charging
-Remove the cover on the charging port and connect the charger.
-When the charger is connected, with power on or off, the Headset will turn off. While charging, the LED indicator will show a solid red light.
-The buttons will not function while the device is charging.
-It takes 2 hours to fully charge the Headset.
-When charging is complete, the LED indicator will turn off.
Low battery
-A low battery tone will play once every 30 seconds.
-When the battery is not charged, the Headset will turn off.
Power on
-Press and hold the PWR/END button for 2seconds. �The power will turn on and a booting tone will play.
Power off
-Press and hold the PWR/END button for 5seconds.
�A shutdown tone will play, the Bluetooth link will disconnect, and the power will turn off.
Pairing
-Prior to using the Headset for the first time, you must pair it with a Bluetooth- enabled handset.
-With the
�You will hear a pairing tone and the LED indicator will stay red, when the device enters Pairing Mode.
▶Using your handset, find the Bluetooth Menu and “search for” or “add” new devices.
▶Select “LG HBM- 730” from the list of devices and pair it with your handset. �When asked for the Pass/PIN code during the pairing procedure,
please enter “0000” (4 Zeros).
�Once pairing has completed successfully, you will hear a beep.
How to use 
�After pairing successfully, be sure to “Connect” to the LG HBM - 730. ▶If you want to pair with other devices in the future, the Headset
must be placed in Pairing Mode.
�If it will be not connected the “Pairing” for three minutes, the Headset will turn off automatically.
Auto Reconnect
-When the HBM - 730 turns off accidentally or intentionally during connected condition, the headset and handset will disconnect.
The Headset and handset will automatically reconnect without pairing when the HBM - 730 turns on.
[ Out of range ]
-When the HBM - 730 and your handset are separated by a distance of 33 feet (10meters) or more, the Headset and handset will disconnect. When the handset and HBM - 730 are brought back within the required distance, the HBM - 730 will automatically reconnect with the handset.
-If the Headset and handset do not automatically reconnect when they are back within the required range, briefly press the PWR/END button to reconnect manually.
Volume control
-Press the VOLUME UP or VOLUME DOWN button to adjust the speaker volume.
-There are eight levels of speaker volume.
Calling
Answering a call
-When there is an incoming call, the Headset will ring.
-Briefly press the PWR/END button to answer an incoming call.
6 | 7 |
