Connections (Cont’d)
Assembling the Front Speaker
The front speakers are detached from the speaker stands.
Connect the speaker cords and assemble the front speakers to the speaker stands as illustrated.
How to connect the front speakers
When you do not use the stand
Connect the speaker cords to the appropriate terminals on the bottom face of each front and rear speaker.
When you use the stand
After connecting the speaker cords to the appropriate terminals on the bottom face of each front and rear speaker, attach the front and rear speakers to the upper speaker stands.
To attach the front speaker to the stand
Assembling the Wireless Speaker
To attach the wireless speaker |
| |
to the stand | PREPARATION | |
Connect the speaker to the stand using the screwdriver | ||
|
and screw, as illustrated.
To detach the wireless speaker from` the stand
Reverse the operations described in “To attach the wireless speaker to the stand”.
Setting the Wireless Speaker Channel
If there is a similar wireless speaker product nearby,
interference may occur. In this case, change the
channel switch to a different channel, and turn off the power, then turn on again.
By using the Channel Switch, set to the same channel.
To detach the front speaker from the stand
Push a pointed object such as ball point pen through the hole and tilt the speaker as illustrated.
Channel Switch | ||
CHANNEL | ||
1 | 2 | 3 |
Rear of Transmitter |
| Left/Right |
| Wireless Speaker | |
Notes
In order to operate the unit properly, both Left and Right Wireless Speakers must be turned on.
Sound may be interrupted due to the effect of external radio waves.
13
