Safety
The instructions related to safety and use indicated in the this installation manual are intended for the prevention of unexpected danger, damage, or failure.
Do not contact electrically active parts of the panel, such as terminals, without appropriate safety gear. Contact may result in lethal spark or electric shock.
Do not use or install if the module is broken or torn. Failure to comply may result in electric shock.
Perform all work in dry conditions and use only dry tools. Do not handle wet panels without appropriate protection equipment. Failure to comply may result in accident or death. accident or death.
Damaged modules must be treated with safety protection equipment. Failure to comply may result in serious bodily injury or death.
Do not approach the damaged or broken module unless you are an authorized or qualified expert. Failure to comply may result in serious bodily injury or death.
Use proper equipment, connectors, wires and buttresses for the installation of the module. Failure to comply may result in product damage, product failure or bodily injury.
Installation during rain, heavy wind or snowy day may result in bodily injury or death.
Holes in the frame or glass of the module may decrease the strength of the frame or break the glass.
Do not touch the glass surface or frame of the solar module after installation of the module. It may result in injury or death.
Heavy objects must be kept off of the solar module. Do not stand on or step on the module. Do not drop the module. Failure to comply may result in product damage, product failure or bodily injury.
Do not scratch the coating surface of the frame. Scratches may decrease the total solar output due to corrosion of the frame.
Do not artificially concentrate sunlight on the solar module surface. Failure to comply may result in product damage or failure.
Do not apply a shock to the junction box of the module or pull the cable. Do not remove the labels attached to the module. Failure to comply may result in damage of the product.
If the installing modules on curved surface, (e. g. arch type), as shown in the below picture, do not forcefully modify the module in the installation when connecting it with the structure. Only install the module in the place where the structure for the panels has been properly set up. An improper structure may cause deformation of the panels. Panels may also be damaged by unapproved installation methods such as the use of a crane.
Module | Module |
Installing structure | Installing structure |
(bent type) | (Stralght type) |
Product Deformation | Occurrence of space |
2
