LG Electronics L1960TC, L1760TR, L1760TG, L1760TQ Connecting with the PC, Connecting the Display

Connecting the Display

Connecting with the PC

1. Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off.

2. Connect the signal cable 1 . When attached, tighten the thumbscrews to secure the connection.

3. Connect the power cable 3 with the AC-DC adapter (AC-DC power supply) 2 , and then plug the cable in the outlet.

NOTE

This is a simplified representation of the rear view.

This rear view represents a general model; your display may differ from the view as shown.

DVI-D DC-IN D-SUB

[ Arranging the cables]

DVI-D DC-IN D-SUB

3

2

Wall-outlet type

PC PC-outlet type

1

PC

	DVI-D(This feature is not available in all countries.)
	PC
[ Connecting the cables]	MAC
	Mac adapter
	For Apple Macintosh use, a separate plug adapter is needed to change
	the 15 pin high density (3 row) D-sub VGA connector on the supplied

cable to a 15 pin 2 row connector.

4. Touch the power button in front to turn on the monitor.

The 'Self Image Setting Function' will automatically run

when the monitor is on. (Only Analog Mode)

NOTE

‘Self Image Setting Function’? This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals. If you want to adjust the monitor while in use, or wish to manually run this function once again, push the ‘SET/AUTO’ button on the front panel of the monitor. Otherwise, you may execute the ‘ Factory reset’ option on the OSD adjustment menu. However, be aware that this option initializes all the menu items except ‘Language’.

A5