To remove the Stand Base Type. B | LG Electronics L1719SP, L1919SP

To remove the Stand Base:

1. Ensure there are two latches at the 2.Hold the body of the Stand as it follows. bottom of the Stand Base.

3. Press the two latches individually toward each end as shown

4. Pull up the body of the Stand while holding the Stand Base with the other hand.

5. The body of the Stand and the Stand Base are successfully separated.

Image 7

Contents

L1719S/L1719SP L1919S/L1919SP On Safety Important Precautions On Disposal On InstallationOn Cleaning On Repacking Connecting the stand Connecting the Display To remove the Stand Type. a To remove the Stand Base Type. B Ergonomic Positioning your display Power Cord Signal Cable Using the Computer OSD LOCKED/UNLOCKED Control Panel FunctionsFront Panel Controls Control Function ControlFunction Auto Image AdjustmentPower Button Power Indicator Screen Adjustment On Screen Display OSD Control Adjustment Main menu Sub menu Reference On Screen DisplayOSD Selection and Adjustment Sub-menus Blue Contrast GammaRED Green OSD Position White Balance PhasePower Indicator Factory Reset User Flatron F-ENGINE OSD Unlocked will appear TroubleshootingIs the power cord of the display connected? Do you see OSD Locked when you push Menu button? Screen color is mono or abnormal Screen blinks Have you installed the display driver? Weight ResolutionPower Dimensions A21 Preset Modes Resolution SpecificationsIndicator Installing the Wall mount plate Kensington Security Slot Wall mount plateSeparate purchase Digitally yours