Connecting the Display
Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off.
Connecting the stand base or Removing the stand base
1. Place the monitor with its front facing downward on a cushion or soft cloth.
2. Align the hooks on the stand body with the matching slots in the base of the monitor.
3. Insert the hooks into slots.
Warning: The tape and locking pin may only be removed from those monitors equipped with a standing base when the base is pulled up.
Otherwise, you may be injured by the protruding sections of the stand.
Hook
Slot
4. Use a coin on the back of the stand base and turn the screw clockwise to tighten.
5. When you desire to detach the monitor from the stand base, use a coin to turn the screw counterclockwise.
Screw
100
100
Important
This illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture.
Once you connect the stand base, try not to disconnect it.
Do not carry the product upside down holding only the stand base. The product may fall and get damaged or cause injury your foot.
4
