10

Setting up the Player

The picture and sound of a nearby TV, VCR, or radio
may be distorted during playback. If this occurs,
position the player away from the TV, VCR, or radio,
or turn off the unit after removing the disc.

DVD Player Connections

Depending on your TV and other equipment there are
various ways you can connect the player. Please refer
to the manuals of your TV, stereo system or other
devices as necessary for additional connection
information.
Video and Audio Connections to Your TV
Make sure the DVD player is connected directly to the
TV and not to a VCR, otherwise the DVD image could
be distorted by the copy protection system.
Audio: Connect the left and right AUDIO OUT
jacks of the DVD Player to the audio left and right
IN jacks on the TV (A) using the audio cables.
Do not connect the DVD Player’s AUDIO OUTjack
to the phone in jack (record deck) of your audio
system.
Video: Connect the VIDEO OUTjack on the DVD
player to the video in jack on the TV using the
video cable (V).
S-Video: Connect the S-VIDEO OUTjack on the
DVD Player to the S-Video in jack on the TV using
the S-Video cable (S)
Component Video : Connect the COMPONENT
VIDEO OUT / (480p / 720p / 1080i) jacks on the
DVD Player to the corresponding in jacks on the
TV using an YPb Pr cable (C).
• If your television is a high-definition or
“digital ready” television, you may take
advantage of displaying the highest video
resolution possible.
If your TV does not accept your resolution
setting, the picture will appear scrambled.

Resolution setting

You can change the resolution for the COMPONENT
VIDEO OUT / (480p / 720p / 1080i) video output by
pressing RESOLUTION on the front panel. Available
resolution settings are as shown below.
OUTPUT Available 1
CONNECTION Resolution
HDMI 1080i/ 720p 1
VIDEO OUT 480p/ 480i
COMPONENT 1080i/ 720p 1
VIDEO OUT 480p/ 480i
VIDEO OUT 480i 1
S-VIDEO 480i 1
Notes:
For 720p and 1080i resolution, only non-copy
protected discs can be played back. If the disc is
copy protected, it will be displayed at the 480p
resolution.
1080i and 720p do not work with the analog video
connections (VIDEO OUT & S-VIDEO).
Installation and Setup