REFRIGERATOR INSTALLATION
2. Replacing Refrigerator Door
Right Door
Lower the door onto the middle hinge pin (7).
Make sure the door is aligned with the cabinet.
Replace the top hinge (4) installing hinge screws (3) to secure it.
Make sure the gasket on the door is flush against the cabinet and is not folded.
Support the door on the handle side while securing. And make sure the door is straight and the gap between the doors is even across the front.
Install the ground screw (6).
Connect the door switch wire (2).
Tighten the cover screw (1).
Left Door
Lower the door onto the middle hinge pin (5).
Make sure the door is aligned with the cabinet.
7
Replace the top hinge (4) installing hinge screws (3) to secure it.
Make sure the gasket on the door is flush
against the cabinet and is not folded.
Support the door on the handle side while
securing. And make sure the door is straight and the gap between the doors is even across the front.
Connect the door switch wire (2).
Tighten the cover screw (1).
Note: To use like reference the previous image.
HOW TO REMOVE DOOR HANDLES
5
NOTE: Handle appearance may vary from illustrations on this page.
1.Removing Refrigerator Handle
•Loosen the set screws (1) with the 3/32” Allen wrench and remove the handle (2).
•Loosen the handle mounting fasteners (3) with the 1/4” Allen wrench.
10
