REFRIGERATOR INSTALLATION
REMOVING AND REPLACING REFRIGERATOR DOORS
1. Removing Refrigerator Door
wCAUTION Before you begin, unplug the refrigerator. Remove food and bins from doors.
uLeft Door - FIGURE 2
1.Disconnect water supply tube by pushing back on the disconnect ring (4). - FIGURE 1
2.Open door. Loosen top hinge cover screw (1).
Use flat tip screwdriver to pry back hooks on front underside of cover (3). Lift up cover.
3.Disconnect door switch wire harness (2). Remove cover.
4.Pull out the tube.
5.Disconnect the three wire harnesses (5). Remove the grounding screw (6).
6.Rotate hinge lever (7) counterclockwise and remove. Lift top hinge (8) free of hinge lever latch (9). w CAUTION When lifting hinge free of latch, be careful that door does not fall forward.
7.Lift door up from middle hinge pin and remove door.
8.Place door, inside facing up, down onto a
uRight Door - FIGURE 3
1.Open door. Loosen top hinge cover screw (1). Lift up cover (3).
2.Disconnect door switch wire harness (2). Remove cover.
3.Disconnect wire harness (5). Remove the grounding screw (6).
4.Rotate hinge lever (7) clockwise and remove. Lift top hinge (8) free of hinge lever latch (9). w CAUTION When lifting hinge free of latch, be careful that door does not fall forward.
5.Lift door up from middle hinge pin (10) and remove door.
6.Place door, inside facing up, down onto a
FIGURE32 | 12 |
| FIGURE1 | 3 |
| 7 | 8 |
| 3 |
| |||
7 | 6 | 4 | 9 |
| 5 | 2 |
| 6 | 9 |
|
| ||
| 8 |
|
|
| 5 |
|
|
|
| FIGURE1 |
| ||
|
|
|
|
|
|
|
|
|
|
| 4 | ||
15
