REFRIGERATORINSTALLATION
9
REMOVING, REVERSING AND REPLACINGREFRIGERATOR DOORS
TOOLS NEEDED: 10mm hex-head socket wrench,
No. 2 Phillips screwdriver, flat-head screwdriver, 10mm
open-end wrench, flat 2-inch putty knife.
IMPORTANT:Before you begin, turn the refrigerator OFF
and unplug it. Remove food and any adjustable door or
utility bins from doors.
HOW TO REVERSE DOOR OPENING DIRECTION
(when converting from the left-opening type to right-
opening type)
1. Removing Refrigerator Door
Remove the top hinge cover (1).
Remove the 3 screws and lift off the top hinge (2).
Lift the Refrigerator door (3) slightly and remove it.
Pry off the cover (4) using a slotted screwdriver and
attach it on the right.
Loosen the screw (5), remove the stoppers (6) and
attach them on the left (on the opposite side).
Loosen the pin (8) and remove it.
Lift off the washer (9).
Pry off the cover (7) using a slotted screwdriver and
attach it on the right.
2. Removing Freezer Door
Lift the door (10) slightly and remove it.
Loosen the 2 screws (11), the 2 screws (12), and lift
off the middle hinge (13).
Take off the base grille (14).
Remove the cap (15) and attach it on the right.
Loosen the 2 screws (16), remove the bottom hinge
(17), and attach on the right.
Loosen the 2 screws (18), remove the bottom hinge
(19), and attach on the left.
Loosen the 2 screws (20) and attach the stopper (21)
on the left side of the base.
3. Removing Refrigerator Handle
Remove the cap (1) and the 2 caps (2) using a
slotted screwdriver save the caps.
Pull the upper cover (3) upward and take it off.
Pull the lower cover (4) downward and take it off.
Loosen the 2 screws (5), take off the handle (6), and
install it on the right.
Attach the upper cover (3) by pushing it down.
Attach the lower cover (4) by pushing it up.
Attach the removed the cap (1) and the 2 caps on the
left.