LAMP
REPLACEMENT
1.Unplug the power cord from the outlet.
2.Remove refrigerator shelves.
3. To remove the lamp cover, insert type driver in the underside of the lamp cover and pull it out forwards.
4.Turn the lamp counterclockwise.
5.Assemble in reverse order of disassembly. Replacement lamp must be the same specification as original. (Max 40W)
Power Failure
Most power failures are corrected in an hour or two and will not affect your refrigerator temperatures. However, you should minimize the number of door openings while the power is off. During power failures of longer duration, place a block of dry ice on top of your frozen packages.
If You Move
Remove or securely fasten down all loose items inside the refrigerator.
To avoid damaging the leveling screws, turn them all the way into the base.
Anti-Condensation Pipe
The outside wall of the refrigerator cabinet may sometimes get warm, especially just after installation. Don't be alarmed. This is due to the
GENERAL
INFORMATION
Vacation Time
During average length vacations, you will probably find it best to leave the refrigerator in operation. Place freezable items in freezer for longer storage. When you plan to be away for an extended period,
■Disconnect the power cord or set refrigerator Dial knob to off position.
■Remove all food and other items from the unit.
■Clean the unit thoroughly.
■Leave the shelves in the unit to discourage children from playing in the unit.
■Leave the doors open and block them to ensure that they cannot be closed.
10
Anti-Condensation
Pipe
wCAUTION
■Dry ice is very cold! Do not allow it to touch bare skin. It is well below 0 °F and will cause immediate frostbite and damage to the skin and other tissue.
■Dry ice is frozen carbon dioxide. Use only in a well ventilated area. As the ice releases carbon dioxide vapor, it could cause
