REFRIGERATOR INSTALLATION
HOW TO REMOVE AND INSTALL THE PULLOUT DRAWER
IMPORTANT: To avoid possible injury, product or property damage, you will need two people to perform the following instructions.
1. Removing Pullout Drawer
•Pull the drawer open to full extension. Remove the lower basket (1) by lifting basket from rail system.
1
•Remove the screw (2) from each side of rail system. 2
2. Installing Pullout Drawer
•Pull both rails (1) out to full extension.
1
•Hook the door supports (2) into the rail tabs (3), as illustrated, and lower the door into final position. And tighten the screw (4).
2 |
3 |
4 |
•Lift the top of door to unhook door supports from rail system. Lift door up to remove.
wCAUTION: When you remove the drawer, do not hold handle. If it comes off, it could cause personal injury.
wCAUTION: When laying down the drawer, be careful not to damage the floor or hurt your feet by the sharp edges on hinge side.
•With the drawer pulled out to full extension, insert the lower basket (5) in the rail assembly until it doesn’t move forward.
5
wWARNING: To prevent accidental child and pet entrapment or suffocation risk. DO NOT allow them to play inside of drawer.
wWARNING: DO NOT step or sit down on Freezer Door.
13
