REFRIGERATORSHELVES
The shelves in your refrigerator are adjustable to meet
your individual storage needs. This units are all glass
shelves.
Storing similar food items together in your refrigerator and
adjusting the shelves to fit different heights of items will
make finding the exact item you want easier; it will also
reduce the amount of time the refrigerator door is open,
saving energy.
IMPORTANT: Do not clean glass shelves with warm
water when they are cold. Shelves may break if exposed
to sudden temperature changes or impact, such as
bumping. For your protection, glass shelves are made
with tempered glass, which will shatter into small pebble-
sized pieces.
NOTE: Glass shelves are heavy. Use special care when
removing them to avoid dropping them.
Adjustable Shelves
Remove shelves from the shipping position and replace
shelves in the position you want.
To remove a shelf Tilt up the front of the shelf in the
direction of (1) and lift it in the direction of (2). Pull the
shelf out.
To replace a shelf Tilt the front of the shelf up and
place the shelf hooks into metal slots at desired position.
Then lower the front of the shelf so that the hooks drop
into the slots.
NOTE: Make sure that shelves are level from one side to
the other. Failure to do so may result in the shelf falling or
spilling food.
Slide Out Shelves
You can slide some glass shelves in and out of your
refrigerator as follows.
To slide the shelf out,carefully pull front of shelf
toward you.
To slide shelf in,push shelf in until it stops.
To remove a sliding shelf from its metal frame:
1. Pull the shelf toward you until it stops.
2. Tilt the front of the shelf up and pull it past the stop.
3. Lift up the shelf to remove.
Replace the shelf by reversing the above steps.
USING YOUR REFRIGERATOR
17
ICE TRAY (on some models)
Icemaking
If the tray is filled with water
to the highest level, it will be
difficult to remove ice cubes.
To remove ice cubes,twist the tray.
Do not bend the ice tray. Doing
so may result in damage to the
tray.