14 Room Air Conditioner
Installation
7.Measure height of window opening from top
of Bracket assembly as shown Fig.5.
Subtract 20-3/4 inches.Mark this
measurement on Curtain and cut the Curtain.
(Fig.5)
8.Slide Cur tain into Curtain Frame.Slide
Curtain Frame assembly into side Guides of
the Air Conditioner cabinet.Make sure
Curtain is firmly enclosed on all sides by the
Frame.(Fig. 6)
9.Cut side Guide seal into 2 equal lengths.
Remove protective backing and apply it to the
rear side of cabinet Side Guides, starting just
below Curtain Frame assembly.Pinch off
excess length so seal is even with the bottom
of side Guide.(Fig. 7)
10.Place Air Conditioner in window opening. It
should sit on Bracket assembly so that
Curtain Frame and cabinet Side Guides are
against top and side window jambs.Mate
front of Bracket with Base Guide attached to
the bottom of base pan.
11.Drill 1/8 inch holes in window track through
the existing holes on Base Guide.Screw 4
Type C screws through the holes.(Fig. 8)
12.If this is a casement window installation,
proceed to Casement Window Installation.If
not, slide inner window sash firmly against
side of the cabinet.
13.Drill 1/8 inch hole in window jamb to align
with the existing holes in the Curtain Frame.
Attach Curtain Frame to window frame with
2 Type B screws.(Fig. 8)
Frame Curtain
Curtain
Apply weather seal
to side guides
just below edge of
Curtain Frame .
Type B screwType B screw
Base panBase pan
BracketBracket
Windo
Windo
w Track
Base GuideBase Guide
Type C screw Window Track
°C
Fig.5
Fig.6
Fig.7
Fig.8