Part 5 OPERATION CHECKLIST
1 
CHECKING OPERATION
Each of the functions has been factory checked before shipping. However, it is suggested that you verify the operation of the oven once more. Refer to the Owner’s Manual. Follow the instructions for the basic check.
1.Turn on power supply. The initial signal sound will be heard and LG logo should be appear in the display.
2.Check the operation of the broil mode. When the oven is set to broil, the upper element in the oven should become red. After few minutes, partially open the oven door. You should feel heat from the oven. Press the “CLEAR/OFF” pad.
3.Check the operation of the bake mode. After setting the oven to 350˚F/177˚C for baking, the temperature of the oven in the display should increase. Press the “CLEAR/OFF” pad.
4.Check the operation of the convection bake mode. After setting the oven to 350˚F/177˚C for convection baking, the fan inside the oven should come on with the door closed. Press the “CLEAR/OFF” pad.
5.Turn on and off the oven light to check the lights are normal condition.
6.Check the operation of the furnace convection mode. After setting the oven to 350˚F/177˚C for the furnace convection mode, the back element should light up and the fan inside the oven should come on with door closed.
IMPORTANT NOTE
•A small amount of smoke and odor may be noticed during the initial
•If your oven does not operate properly or an “F”, followed by a number, appears in the display, see your Owner’s Manual for troubleshooting list. The list includes common occurrences that are not the result of defective workmanship or materials in this product. If the problem occurs continuously, contact your dealer.
•Refer to the warranty in your Owner’s Manual for our
- 12 -
