CONNECTIONS | IR BLASTER SETTINGS | HOME |
The Setup Wizard will begin when you turn on the TV for the first time. You can connect the LG remote to a cable/satellite box by following the steps shown below.
Live TV | Input List & Settings | Next page |
Wired Wireless
1
Router
|
| You can see the screen shown above to start | |
|
| the set up routine. There, select (A) to access | |
|
| the IR blaster settings. | |
|
| ||
| IR Blaster cable |
| |
HDMI or Component.. |
|
| |
| Place the IR Blaster so that |
| |
| the infrared transmitter points | Select the correct port that is connected to the | |
| to the remote sensor of the | ||
| cable/satellite box. You should see a TV signal once | ||
| Cable/Satellite Box. | ||
| the correct port is selected. | ||
2 | 3 | ||
|
| ||
Cable/Satellite Box | Other devices |
| |
Home theater/ |
| ||
|
| ||
|
| Select your connected device type. |
Check if the IR Blaster is firmly plugged into the IR Blaster port and is placed near the remote sensor of your device as shown above.
The TV will generate a test code to see if the remote is properly working with the cable/satellite box. Press the CH up and down to check the code. If the Channel doesn’t change, then select [No, try next code] to repeat this step until you find right code.
Channel 
description
Launcher Bar | * Please note that you need to have a Google account to setup |
| the TV. It makes it more convenient to use Google’s services and |
| automatically restores your personal apps after a software update. |
PRIMETIME QUICK GUIDE
The new quick guide makes it easy to find live TV content well organized in categories (Movies, Drama, Sports, etc.). Press the guide key anytime to bring up the best live TV content to you immediately.
1 | Connecting to a network | |
| ||
Connect the TV to a router with a LAN cable. |
| |
Or connect with |
| |
| Setup Wizard. For seamless internet streaming LG recommends a |
|
| stable 4Mbps broadband speed and 1.5Mbps as a minimum. |
|
| Connecting the cable/satellite box |
|
| Use the appropriate cable that is provided from your cable or satelite pro- |
|
2 vider to connect the cable/satellite box to the TV. Place the IR Blaster near | Select your lineup provider from the list. A TV signal should | |
| the remote sensor. | appear once you pick the correct provider. |
|
| |
The TV will generate a list of premium channels. Select
[Yes] if you receive any of these channels.
Your channels are analyzed.
If it is finished successfully. Select [Next].
3 Connect other devices
Connect the Audio amplifier and other devices to the TV if necessary.
Select the correct cable/satellite box manufacturer.
Your LG remote is now set up to your cable/satellite box.
You can now access the channel guide or connected
