Operating Instructions

Energy-SavingCoolingMode(Optional)

Energy-saving cooling mode can save energy in cooling and healthy dehumidification operation, because it can operate efficiently by setting body-adaptation time according to the change of time and temperature and adjusting automatically desired temperature.

1.Press the START/STOP BUTTON to start the unit.

2.Open the door on the remote controller.

Select cooling operation or healthy dehumidification operation.

3.Press the ENERGY-SAVING COOLING MODE BUTTON.

4.To cancel the energy-saving cooling mode, press the ENERGY-SAVING COOLING MODEL BUTTON again and unit will operate in previous mode(Cooling or healty dehumidification mode).

DisplayLuminosity(Optional)

The Display Luminosity can be adjusted by using the remote control.

Press the start/stop button to start the unit. Open the door on the remote control, press the 2ndF button and, press display luminosity button.

Display will be dark. Press the button again to set bright display.

Forcedoperation

Operation procedures when the remote control can't be used.

The operation will be started if the ON/OFF button is pressed.

If you want to stop operation, re-press the button.

ENGLISH

ON/OFF

button

 

Cooling Model

 

Heat pump Model

 

 

 

 

 

 

Room Temp. 24°C(75.2°F)

21°C(69.8°F) Room Temp. < 24°C(75.2°F)

Room Temp. < 21°C(69.8°F)

 

 

 

 

 

 

 

Operating mode

Cooling

Cooling

Healthy Dehumidification

Heating

Indoor FAN Speed

High

High

High

High

 

 

 

 

 

Setting Temperature

22°C(71.6°F)

22°C(71.6°F)

23°C(73.4°F)

24°C(75.2°F)

 

 

 

 

 

Test operation

During the TEST OPERATION, the unit operates in cooling mode at high speed fan, regardless of room temperature and resets in 18 minutes.

During test operation, if remote controller signal is received, the unit operates as remote controller sets.

If you want to use this operation, Press and hold the ON/OFF button for 3~5 seconds, then the buzzer sound 1 "beep".

If you want to stop the operation, re-press the button.

Owner's Manual 13

Page 13
Image 13
LG Electronics MFL39817401 owner manual Energy-Saving Cooling Mode Optional, Display Luminosity Optional, Forced operation

MFL39817401 specifications

LG Electronics has long been a leader in consumer electronics and home appliances, and the MFL39817401 is one of the standout components designed to enhance appliance performance. This part number refers to a specific replacement part for LG's innovative washer-dryer systems, which are known for their efficiency, convenience, and cutting-edge features.

One of the main features of the MFL39817401 is its robust engineering, designed to withstand the rigors of regular use while maintaining optimal performance. The part is built with high-quality materials that ensure longevity and reliability. This focus on durability means that users can expect consistent operation over many years, reducing the need for frequent replacements and repairs.

The design of the MFL39817401 reflects LG's commitment to innovation. This replacement part incorporates advanced technologies that boost the overall effectiveness of washing and drying cycles. Its compatibility with various LG appliances makes it an essential component for those looking to maintain or enhance their laundry experience. The part's ergonomic design allows for easy installation, providing a hassle-free solution for consumers seeking to replace worn-out components.

In addition to its durability and design, the MFL39817401 embodies LG's focus on energy efficiency. The part plays a key role in the appliance's ability to minimize water and energy consumption, helping users save on utility bills while promoting environmental sustainability. By utilizing cutting-edge technology, LG appliances equipped with the MFL39817401 can operate at peak efficiency, reducing the overall environmental impact of laundry processes.

Users also appreciate the quiet operation that the MFL39817401 helps facilitate. LG has designed its appliances with sound-dampening features, ensuring that the washer-dryer operates smoothly without excessive noise. This is particularly valuable for those living in apartments or smaller spaces, where noise levels can be a concern.

Overall, LG Electronics' MFL39817401 encapsulates the brand's dedication to quality, efficiency, and user convenience. By integrating the latest technologies with a focus on durable performance, LG continues to set the standard in the home appliance market, ensuring that consumers receive exceptional value and satisfaction with every product they use. As technology continues to evolve, LG remains committed to enhancing the user experience through innovative solutions like the MFL39817401.