Repair

Service for the CFX Series mixers is available only at our factory, located in sunny Woodinville, Washington. Service for Mackie mixers living outside the United States can be obtained through local dealers or distributors.

If your mixer needs service, follow these in- structions:

1.Review the preceding troubleshooting suggestions. Please.

2.Call Tech Support at 1-800-258-6883, 8am to 5pm PST, to explain the problem and request an RA (Return Authorization) number. Have your mixer’s serial number ready. You must have an RA number before you can obtain service at the factory.

3.Keep this owner’s manual. We don’t need it to repair the mixer.

4.Pack the mixer in its original package, including endcaps and box. This is very important. When you call for the RA number, please let Tech Support know if you need new packaging. Mackie is not responsible for any damage that occurs due to non-factory packaging.

5.Include a legible note stating your name, shipping address (no P.O. boxes), daytime phone number, RA number, and a detailed description of the problem, including how we can duplicate it.

6.Write the RA number in BIG PRINT on top of the box.

7.Ship the mixer to us. We recommend United Parcel Service (UPS). We suggest insurance for all forms of cartage. Ship to this address:

Mackie Designs
SERVICE DEPARTMENT
16220 Wood-Red Rd. NE
Woodinville, WA 98072

8.We’ll try to fix the mixer within three business days. Ask Tech Support for the latest turn-around times when you call for your RA number. We normally send every- thing back prepaid using UPS BLUE (Second Day Air). However, if you rush your mixer to us by Next Day Air, we’ll treat it in kind by shipping it back to you UPS RED (Next Day Air). This paragraph does not necessarily apply to non-warranty service.

APPENDIX B: Technical Info

Specifications

CFX•12, CFX•16, CFX•20
Mixer Section
Frequency Response

Mic Input to any Output (Trim at 0 dB): +0, –1 dB, 32Hz to 20kHz

Distortion

THD and SMPTE IMD; 20Hz to 20kHz

Mic Input to Main Output:

< 0.05% @ +4 dBu output

Noise

20Hz to 20kHz BW (150Ω source impedance)

Equivalent Input Noise (EIN): –127 dBu

Residual Output Noise:

Main, Monitor, & Effects outputs Channel & Master levels off –95 dBu

Common Mode Rejection Ratio (CMRR)

60 dB @ 1kHz, Trim @ 0 dB

Crosstalk

Adjacent Inputs or Input to Output: –90 dB @ 1kHz

Fader Off

–90 dB @ 1kHz

Mute Switch and Break Switch Mute –80 dB @ 1kHz

Input Level Trim Control Range

+6 to –50 dB

Phantom Power

+48V DC

Equalization

Low Cut:

100Hz, –18 dB/octave

Mono Channel EQ:

 

High

±15 dB @ 12kHz

Mid

±15 dB @ 100Hz to 8kHz

Low

±15 dB @ 80Hz

Stereo Channel EQ:

 

High

±15 dB @ 12kHz

High Mid

±15 dB @ 3kHz

Low Mid

±15 dB @ 400Hz

Low

±15 dB @ 80Hz

Graphic EQ (9 bands):

 

Q = 1.414, ISO octave centers

±15 dB @ 63, 125, 250, 500, 1k, 2k, 4k, 8k, 16k Hz

Mixer Rated Output

Main, Sub, Aux, & Efx:

+4 dBu

Maximum Rated Output:

+20 dBu

Maximum Input Levels

Mic Input:

–28 dBu, Trim @ +50 dB

 

 

+18 dBu, Trim @ +6 dB

 

Line Input:

–8 dBu, Trim @ +30 dB

 

 

+38 dBu, Trim @ –15 dB

 

Insert Return, Stereo Line Input, Tape Input, and

21

Effects Return: +20 dBu