Configuration Options via GUI

Access the OAT100R Web GUI

Note: The OAT100R must be connected to an IP network for GUI access. See “Network and Communication Setup” on page 22 for further information.

If necessary, consult the system administrator to obtain the current “admin” user password before proceeding. The default admin user password is “Password4Partners” (case-sensitive).

1.Launch a web browser, and type http://ipaddress in the browser’s address bar, where ipaddress is the network IP address of the OAT100R. Then, press Enter.

2.The system will display a login authentication pop-up window. In the User Name field, type admin; in the Password field, type the admin user password. Then, click OK.

The OAT100R web GUI opens with the System Status on display (see “OAT100R System Status” on the next page for further information). The options panel at the left of the screen enables you to view and configure system settings. The following sections provide detailed information on the configuration settings and commands.

Note: It is possible, if desired, to change the login password via the command line interface Setup Menu “pwd” command as described on page 62.

When you have completed your activities in the OAT100R web GUI, it is recommended that you close your browser to prevent unauthorized access to the system.

206-4218

23