Configuration Options via GUI (Cont.)

Typical Tuner

Menu Screen

Set the Tuner Channel

In the Change Channel section of the Tuner Menu screen, you can specify the appropriate channel number for the tuner.

Note: It is also possible to set tuner channels in the Input Channels screen. See “Modify Tuner/Output Assignments” on page 35 for further information.

Note: If the system is set for RF 64-QAM output, up to four tuners can be used at a time.

1.Click on the down arrow at the right of the Channel Number field, and select either the desired channel number or N/C (no connection) from the drop-down list of options.

2.Click on the Set button at the right of the field.

If the channel is set successfully, the system will display at the bottom of the Tuner Information display.

(Continued on next page)

206-4218

27