Commercial Mode Overview (Cont.)

External MPI Control

To control the STB using an external MPI control device, you must use the STB’s MPI port for communication purposes.

Note: The STB-2000 is not equipped with an MPI card slot.

FTG Mode

In this mode, the STB’s CPU is configured with an FTG Channel Map, and the CPU controls and restricts the tuning operation of the STB based on this FTG Channel Map. The FTG Channel Map enables the decryption of each Pro:Idiom ® encrypted channel and also provides logical channel mapping of physical RF channels (analog and digital) and Aux inputs.

Note: Logical channel mapping of physical RF channels eliminates dash tuning (for example, physical 19-3 can be mapped to logical channel 9). Physical channel tuning requires that you include the dash when direct entering channel numbers.

FTG Mode Features

FTG Mode provides the following features:

•Logical tuning of physical RF channels and Aux inputs.

•Logical tuning of IP channels.

•Mapping of RF channels with minor (program) numbers up to 999.

•FTG Channel Map of up to 600 logical channels.

•Start Channel set for RF, Aux input, or IP delivered content.

•Pro:Centric data delivery over RF or IP.

•TV Zoning and Wi-Fi Zoning options for location-specific configuration.

LG’s FTG File Manager PC software enables you to create an FTG Configuration (.tlx) file, which may be used to configure the CPU for FTG Mode. FTG File Manager utilities enable you to create/edit an FTG Channel Map and configure Installer Menu settings. You can also save (Learn) a TLX file from a Master STB.

In this mode, the STB’s CPU must be configured with an FTG Channel Map and FTG Installer Menu settings using one of the following processes:

•Local: Configure an individual STB-2000 via its USB port using a USB memory device / TLX file. The “Teach to STB (TLX)” process and associated procedures for FTG mode configuration are described on pages 45 to 51.

•Remote: Configure all STB-2000s at the site using a Pro:Centric server head end device (Example:

PCS150R). Load a TLX file on the Pro:Centric server using the TV E-Z Installation “Configuration” option in the Pro:Centric server Admin Client. Refer to the Pro:Centric Server Admin Client User Guide for further information.

10

206-4256