Reference: Wi-Fi Screen Share Features (Cont.)

Application Launch Bar

Note: The Application Launch bar is only available when pre-loaded application icons are selected and when the Pro:Centric application is disabled on the STB. If the Pro:Centric application is loaded on the STB, you must access the Wi-Fi Screen Share options from the STB menus as described on the previous page.

1.Press PORTAL on the remote to display the Application Launch bar. All available application icons will be displayed along the bottom of the screen.

2.Use the Left/Right arrow keys on the remote to highlight the desired application to launch, and then press OK to select it.

Depending on your selection in step 2, a Wi-Fi Direct, Smart Mirroring, or WiDi pop-up window will be displayed.

Wi-Fi Direct

With the Wi-Fi Direct pop-up window on display, use the following procedure to turn ON Wi-Fi Direct and select a device to which to make a connection.

1.In the Wi-Fi Direct pop-up window, use the Left/Right arrow keys to select On in the Wi-Fi Direct field. This will prompt the STB to search for all available Wi-Fi Direct enabled wireless devices, including mobile devices, laptops, etc. Devices found will be listed in the lower half of the screen.

Note: If the search does not initially locate any devices, select Rescan and press OK.

2.Use the Up/Down arrow keys to select/highlight the device with which you wish to share, and then press OK.

3.A new pop-up window will prompt you to confirm your connection request. Select Yes and press OK to continue.

The share request will be sent to the targeted device. The user of that device may choose to allow or not allow the share connection. Similarly, once Wi-Fi Direct is turned ON, other devices may request share connections with this STB (pop-up share requests typically appear in the bottom right of the display screen).

4.If the share request is accepted, media files may now be shared between the device and the STB using Wi-Fi Direct. Select Close and press OK to exit the Wi-Fi Direct window.

5.To access media files/folders on the STB, either press MENU and select the SmartShare or Input menu icon, or press the Input key on the Installer Remote to select the Smart Share device. Then, select the desired media category to view files.

Wi-Fi Direct

Wi-Fi Direct connects a device without AP. Share files using Wi-Fi Direct with SmartShare™.

▪ Wi-Fi Direct

<

On

>

 

 

 

1/1

Device name

 

Connection

LG-P930

 

 

 

RescanClose

Wi-Fi Direct pop-up window display is the same whether the STB is or is not in Pass-through Mode.

74

206-4256