Reference:
MPI When the STB is in
DISPLAY CONTROL 2
DISPLAY MPI
CONTROL 2
HDMI IN 2 & 1
Connections for HDMI output from external devices.
USB 2 & 1
Insert USB memory device for software updates, cloning purposes, FTG Mode via CPU configuration, picture/music entertainment, etc., as applicable.
IN 2 | IN 1 | USB IN 1 | USB IN 2 |
OUT | LAN | DIGITAL | AUDIO | AV IN SERVICE | DISPLAY | 1 | ANTENNA/ |
AUDIO | LINE OUT | IR IN CONTROL | POWER CABLE IN |
HDMI OUT
Use HDMI cable (provided) to connect to display panel HDMI input.
LAN
Use for video IP and/or network connections.
DIGITAL AUDIO
Use for amps and home theater systems. Note:
When the STB is OFF, this port is not enabled.
AUDIO LINE OUT
(3.5 mm jack) Connect audio equipment to use fixed line level audio output. See Reference section, “External Audio Line Out Specifications,” for further information.
AV (AUDIO/VIDEO) IN (3.5 mm jack) Connect composite audio/ video output from external device. Use A/V adapter cable provided.
ANTENNA/CABLE IN
Connect to Antenna/CATV.
POWER (DC IN)
Use 19V 
2.1A 
AC/DC power adapter (provided).
DISPLAY CONTROL 1
(3.5 mm jack) Use TLM cable provided to connect to LG Public Display/Commercial Monitor display panel’s
IR IN
(3.5 mm jack) Connection for external IR receiver (optional). Use when IR
SERVICE
Restricted to service updates.
*Only one DISPLAY CONTROL connection should be used depending on the type of display panel to be controlled. Refer to
76 |