Part 8 TROUBLESHOOTING GUIDE
5.Problem:There is Lint on my Clothes
| Question | What to Do | ||
|
|
| ||
• Is your lint filter full? | Please refer to the manual section on cleaning the lint filter, and please confirm that the | |||
|
| lint filter is clean. It is important that the lint filter is clean before each new load of | ||
|
| laundry. | ||
|
|
|
| |
• Did you properly sort your load of | In order to reduce the amount of lint in a load of laundry, sort lint producers (like a | |||
fuzzy white cotton towel) separately from clothes that might catch lint (such as a pair | ||||
| laundry? | |||
| of black linen pants). | |||
|
| |||
|
|
|
| |
• Do your clothes have excess static | See comments below under There is static in my clothes after drying. | |||
|
| |||
| electricity? |
|
| |
|
|
| ||
• Did you overload your dryer? | Divide your larger load into smaller loads. | |||
|
|
| ||
• Did you place any paper, tissue, or | Sometimes a person might forget to take a piece of paper or a tissue out of the pocket | |||
| other similar material in the load? | |||
| of a pair of pants, and this paper, tissue, or similar material can cause excess lint in a | |||
|
| |||
|
| load of laundry. Confirm that the pockets of pants, shirts, and other articles of clothing | ||
|
| are empty before washing and drying. | ||
|
|
| ||
| 6.Problem:There is static in my clothes after drying | |||
|
|
|
| |
| Question | What to Do | ||
|
|
|
| |
• Did you use fabric softener? | Try using a fabric softener to reduce static electricity. | |||
|
|
|
| |
• Did you over dry the load of | ||||
| laundry? | |||
| Try using a fabric softener or adjust your settings and use a shorter drying time. | |||
|
| |||
|
|
|
| |
• Are you drying synthetic, permanent | These materials can cause static to build up in a load of dried clothes. | |||
| press and blends? | |||
| Try using a fabric softener. | |||
|
| |||
|
|
|
|
7.Problem:The drying time is not consistent
Question | What to Do |
|
|
• Are you using consistent heat | The drying time for a load will vary depending on the heat setting, the type of heat |
settings and consistent load sizes? | used (electric, natural or LP gas), the size of the load, the type of fabrics, the wetness |
| of the clothes and the condition of the exhaust ducts and lint filer. |
|
|
2 5