General Guidelines to MENU Access and Settings
1. Press Soft Key [Menu]. The three menu items will appear on the display screen.
2. Press[v] to go through the list of menu features, or use the side keys.
3. Press the corresponding number to the menu item that you want to select. Then the sub-menu
list will appear on the screen.
4. Press the appropriate key to select the sub-menu you want to access.
5. Select preferred settings, using the [v] keys. Press Soft Key 2 [Back] to go one step backward
while accessing menu or selecting settings.
6. Press Soft Key 1 [Ok] to save the settings or Soft Key 2 [Back] to cancel without saving.
Sound ([Menu]+[1])
Ring Sound ([Menu]+[1]+ [1])
Select the ringer sound with [5] [6] or [v] key. The ring sound will notify that you have an
incoming call.
Ring Type ([Menu] +[1]+[2])
Select one out of four ring types (Ring, Vibrate, Vib+Ring and Lamp) with [5] [6] or [v] key.
Ring & Vibrate Volume ([Menu] +[1]+[3])
Adjust the volume of the ringer using the [5] [6] or [v] key.
Key Tone ( [Menu] +[1]+[4] )
Set Key Tone length and touch tone playback speed.
l Normal : Sends out a tone for a fixed period of time only if you keep the key pressed.
l Long : Sends out a continuous tone for as long as you keep the key pressed.
Key Volume ( [Menu] +[1]+[5] )
Adjust the key beep volume (the volume of sound on key pressing).
Ear Volume ( [Menu] +[1]+[6] )
Adjust the earpiece volume during a call, by pressing the side keys.
Alerts ( [Menu]+[1]+[7] )
1. Fade ( [Menu]+[7]+[1] )
Set an alert to inform you when you have lost a call or lose services.
2. Minute ( [Menu]+[7]+[2] )
Alerts you 10 seconds before the end of every minute during a call.
3. Service ( [Menu]+[7]+[3] )
If on, alerts you when service changes.
When you enter a service area, the phone displays “Entering Service Area” message.
When you leave a service area, the phone displays “Leaving Service Area” message.
4. Call Connect ( [Menu]+[7]+[4] )
Alert tones notify the user of the time when the call is connected.
Display ( [Menu]+[2] )
Backlight ( [Menu]+ [2]+[1] )
Allows you to select how long or when the display screen and keypad are backlit. The backlight is