_,Thescreencolorismonoorabnormal._,Thescreenblinks.• Check if the signal cable isproperly connected
and use a screwdriver to fasten ifnecessary.
•Make sure thevideo card is properly inserted in
the slot.
•Set the color setting higher than 24 bits (true color)
at Control Panel -Settings
• Check ifthe screen is set to interlace modeand if
yes,change it to the recommend resolution.
_, Have you installed
the display driver?
_, Do you see an
"Unrecognized monitor,
Plug&Play (VESADDC)
monitor found"
message?
•Besure to install the display driver from the display
driver CD (or diskette)that comes with your
display.Or,you can alsodownload the driver from
our web site:http://www.lge.com.
• Makesure to check ifthe videocard supports
Plug&Playfunction.