PUMP
Pump Outlet Hose
Screw
Cap |
|
(Remaining Hose) | Tub Pump Bellows |
Remove pump outlet hose.
Remove tub pump bellows.
Remove cap (Remaining Hose.)
Disconnect the wiring.
Unscrew 2 screws. 
Remove the pump.
HEATER
Loosen the M6 heater nut to pull out the heater.
CAUTION
When mounting the heater, be sure to insert the heater into the heater clip on the bottom of the tub.
THERMISTOR
Pull it out by holding the thermistor bracket.
If it is pulled by the wire, it may be broken.
When mounting the thermistor again, make sure that it is got back tight to the bushing.
31
