Liebert To a Liebert environmental unit, Leak detection zone directly beneath unit LT300

Placement on Subfloor Under Cooling Support Equipment

(Other applications such as drip pans and ceiling pipe trays can be monitored)

To a Liebert environmental unit

Leak detection zone (directly beneath unit)

LT300

As shown above, the Liqui-tect 300 (LT300) may be placed on a sub- floor within the leak detection zone—the area directly beneath the unit being protected or other areas such as the unit drip pan or ceiling pipe trays.

The LT300 is a two-wire connection to the Liebert environmental unit. A separate 24VAC power supply is not required for this sensor.

NOTE: For a downflow unit, the LT300 sensor must be located six feet in front of the unit.

2