BATTERY MODE OPERATION

Battery mode occurs in event of extreme input conditions or complete utility failure. The battery system along with the bi-directional converter generates power for the connected load.

During battery mode an alarm sounds every 10 seconds. This will change to 2 beeps every 5 seconds when battery runs low (approximately 2 minutes remaining). Each load/battery level indicator represents a 25% capacity level. As capacity decreases, fewer indicators remain illuminated. Utility LED will flash every second indicating the UPS is operating from battery mode.

Battery mode supports a full rated load for approximately 5 minutes before it shuts down. To increase this time, turn off non essential pieces of equipment (such as idle computers and monitors).

WARNING: Turning off the UPS while in battery mode will result in loss of output power.

The figure below displays approximately 51-75% battery capacity remaining.

Load/ Battery

Level Indicators

Utility High/Low Utility Alarm silence/Test On/Off

76% to 100% load

51% to 75% load

26% to 50% load

0% to 25% load

(Flashes to indicate low battery)

(Flashes every second)

BATTERY RECHARGE MODE

The UPS resumes normal operation once utility power is restored. At this time, the bi-directional converter begins recharging the battery whether the UPS in ON or OFF.

12

DISCONTINUED

PRODUCT

Page 12
Image 12
Liebert 700-2200 VA user manual Battery Mode Operation