AC4
Product Specification/Installation Sheet
Description
The Liebert AC4 is ideal for coordinated control of systems with redundant equipment, such as multiple environmental units or pumps. When the AC4 controller detects an alarm in an operating device, the AC4 enables a standby device and controls the device in alarm as configured, either leaving that device operating or disabling it.
The AC4 controller can also balance usage of devices by rotating
units through Operating and Standby modes according to a
Another capability of the AC4 is monitoring the status of connected devices and keeping personnel apprised through local alarming.
The AC4 controller can interface with anything that closes an electrical contact. To improve process efficiency and troubleshooting, the controller tracks data in two types of logs: alarm and event. The AC4 has a local LCD interface and an RS232 interface.
When an alarm condition arises, the AC4 displays alarm information, sounds an audible alarm, changes the state of the common alarm relay and turns connected devices on or off according to user configuration.
For other applications, contact your local Liebert representative or call
Features and Benefits
•Custom configuration for specific applications
•Alarm and Event logs with time and date stamp
•Backup and download configuration files
•User interface for configuration and monitoring via local LCD or RS232 port
•
•Configuration data and operating program permanently stored in nonvolatile Electrically Erasable Programmable Read Only Memory (EEPROM) for protection against power loss
•
•Status LEDs for verification and diagnostics
AC4 Components and Key Features
Power On/Off switch | Audible horn | Audible horn | Common Alarm connectors | |
jumper | ||||
|
Digital output status LEDs
24VAC power connector
| Manual Override Switch |
LCD contrast | (outputs) |
adjustment | Digital output connectors |
| |
LCD connector | Status LEDs |
| |
DIP switch 1 | Digital output |
| jumper |
Digital input connectors
Serial interface connector | Digital input status LEDs |
(RS232/EIA574) |
1