2
INSTALLATION
Parts required
• Intellislot USB Card
•USB cable
Tools required
• Either #2 (medium) Phillips or small flat head screw driver.
1.It is not necessary to turn
the UPS off prior to instal-
lation. Locate the Intellis-
lot Port on the rear panel
of your UPS. (Location and
orientation may vary
according to specific UPS
model.)
2.Remove the two retaining
screws of the Intellislot
Port cover plate on the
UPS back panel. Save the
screws for reassembly.
3.The card and slot are
keyed to insert in one posi-
tion only. Initially, the
card should slide in freely
as you carefully align
screw holes. As you feel it
click into place, press
firmly to ensure solid seating in the slot.
4.Using the screwdriver, secure the card to the UPS chassis with the
two retaining screws. Make sure the screws are snug, not tight, to
avoid damage to the device.
USB card
being fitted in
Intellislot Port