Liebert Intellislot® Web Card
Quick Start Guide
INSTALL
•Locate the Intellislot option bay on your Liebert
•Insert the IntelliSlot Web Card into the Intellislot bay.
•Secure the card with the supplied screws.
•Connect an Ethernet cable.
DHCP: The card ships with DHCP service enabled. The MAC address is printed on a sticker affixed to the top of the card.
OR
Static IP: To assign a static IP address, use the Service Terminal to configure the card. Proceed to Steps 2 & 3.
CONNECT THE CABLE
•Locate the blue serial configuration cable (null modem) that shipped with the card.
•Connect the configuration cable to the
CONFIGURE THE CARD
•Use terminal emulation software, such as HyperTerminal™, to open a direct connection to the card.
Baud Rate: 9600
Data Bits: 8
Parity: None
Stop Bits: 1
Flow Control: None
•Press Enter for the Main Menu, above right.
•Select option 2 and follow the instructions to enter an IP ADDRESS, NETMASK and GATE- WAY.
•Press Esc to return to the Main Menu.
•Enter X and press Enter to exit HyperTerminal and save your changes.
NOTE
When installing the card in a Liebert NX™, configure the communication port of NX to 2400 baud. Refer to the NX user manual for instructions.