Liebherr 7085682 - 01, 200514 manual Freezer compartment, Using the sectioned shelf, Door racks

Control

Fig. 10

u Lift the shelf slightly and pull forward a little.

u Adjust the height of the shelf. To do so, push the cut-outs along the supports.

u In order to remove the shelf fully, place it at a slant and pull out towards the front.

u Insert shelf with the raised edge pointing upwards at the back.

w The food does not freeze onto the rear wall.

Dismantling shelves

u The shelves can be disman- tled for cleaning.

5.3.5 Using the sectioned shelf*

Three small boxes are available through the customer service as optional equipment instead of one wide and one small box.* Either one or both the boxes can be used. If particularly tall bottles are to be stored, hang only a single box above the bottle rack.*

u Re-positioning the boxes: Lift them for removal and

re-position them as required.*

*

Dismantling door racks

Fig. 12 *

*

Fig. 11

u The glass shelf with stop face (2) has to be at the back.

5.3.6 Door racks

Moving the storage rack

*

u Remove storage rack according to illustration.

*

uThe door racks can be dismantled for cleaning.

5.3.7 Removing the bottle holder*

u Always take hold of the bottle holder on the plastic part.

The boxes can be removed and placed on the table as a single unit.*

*5.4 Freezer compartment

You can store frozen food, make ice cubes and freeze fresh food in the freezer compartment.

*

10 * Depending on model and options