DEFROSTING/CLEANING

Defrosting - Figure 12

The BioFresh compartment

 

defrosts automatically. The water

 

that forms on the rear wall drains

 

into a reservoir at the back of

 

the appliance and evaporates

 

automatically through the

Figure 12

compressor heat.

 

Ensure the defrost water can flow freely through the drain hole in the rear wall (Figure 12).

Cleaning - Figure 12-13

!WARNING

•To prevent possible injury due to an electrical shock, be sure to

disconnect the power cord or turn OFF the circuit breaker before replacing the interior light bulb(s) or cleaning the appliance.

•To avoid injury or damage, DO NOT use steam cleaning equipment to clean the appliance.

Clean the appliance by hand with lukewarm water and a little detergent. DO NOT place components in a dishwasher to clean.

DO NOT use abrasive or scouring sponges. DO NOT use concentrated cleaning agents. NEVER use abrasive or acid cleaners or chemical solvents.

Keep your stainless steel looking new by cleaning with a good quality stainless steel cleaner or polish monthly. High quality stainless steel cleaners and conditioners are commercially available.

DO NOT CLEAN WITH STEEL WOOL PADS or ABRASIVE PADS. DO NOT use cleaners that are not for use on stainless steel, such as glass, tile or counter cleaners. These types of cleaners can damage the surface permanently.

Stainless steel that is exposed to chlorine gas and moisture may have some discoloration. This discoloration is normal. If your unit is used in this environment, clean and polish your stainless steel more often.

If the surface discolors or rusting appears, clean it quickly with a non-abrasive cloth and protect it. Always clean and polish in the direction of the grain and finish.

To clean the storage shelves:

Figure 13. Lift the shelves, slide forward and remove.

Always insert shelves with the guard bar at the back pointing upwards, otherwise food may freeze onto the rear wall.

The glass shelves are designed to prevent the shelves from being pulled out accidentally.

To clean the BioFresh drawers:

Figure 13. Pull the drawers out and grip at the back, and lift out.

To reinstall:

•place the drawers on the extended rails, the rails must align with the front of the drawer and slide in.

•pull the drawer cover out towards you. When reinstalling, make sure the bearing pins snap into place in the grooves.

The drawer and the cover must be flush with one another vertically.

Clean the drain hole (Fig. 13) in the rear wall frequently. If necessary, clean with a thin object, like a cotton swab or something similar.

•Ensure no cleaning water penetrates into the electrical components or ventilation grille.

•Dry all parts well with a cloth.

Figure 13

BF/BFI 1051

15

Page 18 Page 20
Page 19
Image 19
Liebherr BF/BFI 1051, BGEN/es 2956 Defrosting/Cleaning, Defrosting Figure, Cleaning Figure, To clean the storage shelves
Page 18 Page 20

BF/BFI 1051, BGEN/es 2956 specifications

The Liebherr BGEN/es 2956 and BF/BFI 1051 are two innovative products from the renowned Liebherr Group, known for its cutting-edge technology and exceptional engineering in the construction and building industries. Both units exemplify Liebherr's commitment to quality, efficiency, and user-friendly operation.

The Liebherr BGEN/es 2956 is a powerful and versatile tower crane that has gained popularity in the construction sector. It boasts a maximum lifting capacity of 25 tons and a maximum hook height of over 60 meters, making it suitable for large-scale construction projects. One of its standout features is its innovative counter-jib design, which drastically reduces the crane's footprint, allowing for efficient use of space on crowded job sites. Additionally, the BGEN/es 2956 is equipped with advanced control technology, enabling precise and smooth operation. The crane's transportability is also a key characteristic, allowing for easy assembly and disassembly without compromising structural integrity.

On the other hand, the Liebherr BF/BFI 1051 series represents a modern take on concrete batching technology. These powerful concrete mixing plants are designed for high output and efficiency, providing a consistent quality of concrete at various production scales. The BF/BFI 1051 plants incorporate state-of-the-art automation systems, making it possible to monitor and control the mixing process remotely. This feature enhances operational efficiency and minimizes downtime. The system’s modular design also allows for easy customization, enabling users to adapt the equipment to different production requirements.

Both the BGEN/es 2956 and BF/BFI 1051 exemplify Liebherr's dedication to sustainability. The crane integrates energy-saving technologies, significantly reducing its overall carbon footprint. Meanwhile, the concrete plants are designed to optimize resource usage, ensuring minimal waste during operation.

In conclusion, the Liebherr BGEN/es 2956 and BF/BFI 1051 offer impressive features and technologies that meet the demands of modern construction and concrete production. With their robust engineering, advanced automation, and focus on sustainability, they are valuable assets for any construction project. Liebherr continues to set standards in the industry, providing innovative solutions that enhance productivity and efficiency in various applications.
Top Page Image Contents