Liebherr CS 1660 manual Supercool - Figure, Setup Mode - Figure, How to activate the setup mode

Models: CS 1660

1 26
Download 26 pages 202 b
Page 12
Image 12
Supercool - Figure 9

Operation

Supercool - Figure 9

Touching the Supercool icon switches the refrigerator compartment to maximum cooling. It is recommended particularly if you wish to cool large quantities of food, drinks, freshly baked goods or meals rapidly.

Turning on: Touch the Supercool icon briefly so the LED turns on. The refrigerator temperature will drop to its lowest value.

IMPORTANT

The Supercool function uses slightly more energy. After approximately six hours, however, the refrigerator switches back automatically to normal energy-saving operation. If required, the Supercooling function can be turned off sooner.

Turning off: Touch the Supercool icon again until the LED Setup Mode - Figure 9 turns off.

Setup Mode - Figure 9

In the setup mode you can activate the following functions:

How to activate the setup mode: = Sabbath mode

In the setup mode the display will flash continu- = Display brightness

Exit setup mode:Manual background = Temperature display mode

Manual background = Water quantity for Ice cube tray

= Ice maker vacation state

Manual background = Drop symbol reset Manual background = Child lock

How to activate the setup mode:

Touch the Superfrost icon for approximately five seconds

-the Superfrost LED Manual backgroundManual background turns on for 5 sec- onds

-after 5 seconds Manual background will flash in the display.

The appliance is in the setup mode now.

You can select the setup mode functions by touching the freezer compartment Up/Down icons.

Note

In the setup mode the display will flash continu-

ously.

Exit setup mode:

Touch the freezer compartment On/Off icon. The appliance will change back to normal operation.

Freezer compartment Up/Down icons

Supercool icon

 

Supercool LED

Superfrost icon

Figure 9

Freezer compartment On/Off icon

12

Page 12
Image 12
Liebherr CS 1660 manual Supercool - Figure, Setup Mode - Figure, How to activate the setup mode, Exit setup mode, Operation