Liebherr HC 7081411-00 manual How to activate the setup mode, Exit setup mode, ously, Operation

OPERATION

Supercool - Figure 9 Setup Mode - Figure 9

Touching the Supercool icon switches the refrigerator compartment to maximum cooling. It is recommended particularly if you wish to cool large quantities of food, drinks, freshly baked goods or meals rapidly.

•Turning ON: Touch the Supercool icon briefly so the LED turns on. The

refrigerator temperature will drop to its lowest value.

IMPORTANT

The Supercool function uses slightly more energy. After approximately six hours, however, the refrigerator switches back automatically to normal energy-saving operation. If required, the Supercooling function can be turned OFF sooner.

•Turning OFF: Touch the Supercool icon again until the LED turns off.

In the setup mode you can activate the following functions:

= Sabbath mode

= Door gasket heating control

= Display brightness

= Temperature display mode

= Water quantity for Ice cube tray

= Icemaker vacation state

= Drop symbol reset = Child proof lock

How to activate the setup mode:

•Touch the Superfrost icon for approximately five seconds

-the Superfrost LED turns on for 5 sec- onds

-after 5 seconds will flash in the display.

The appliance is in the setup mode now.

You can select the setup mode functions by touching the freezer compartment Up/Down icons.

Supercool icon

SupercoolingLED

Note

In the setup mode the display will flash continu-

ously.

Exit setup mode:

•Touch the freezer compartment On/Off icon. The appliance will change back to normal operation.

Freezer compartment Up/Down icons

Superfrost icon

Figure 9 Freezer compartment On/Off icon

12