Life Fitness 807 FIGURE 5

FIGURE 5

STEP 5:

3/8 X 1” 15

0123456

1/2 1/2 1/2 1/2 1/2 1/2

• To assemble the SEAT PAD (13) to the WOLFF SLEEVE (4), start by sliding two HINGE TABS (9) over the PIN of the

WOLFF SLEEVE (ONE ON EACH SIDE) as shown in FIGURE 5, and SECURELY assemble each HINGE TAB (9) to the

SEAT PAD (13) using two 3/8 X 1” BOLTS (15), two 3/8” LOCK WASHERS (20), and two 3/8” WASHERS (19). (MAKE

SURE BOTH HINGE TABS ARE ALL THE WAY ON THE PIN)

Contents

Main IMPORTANT SAFETY INFORMATION TABLE OF CONTENTS IMPORTANT NOTES Tools Required for Assembly Bolt Length Ruler Page PARTS LIST FIGURE 1 FIGURE 2 FIGURE 3 FIGURE 4 FIGURE 5 FIGURE 6 FIGURE 7 FIGURE 8 FIGURE 9 FIGURE 10 THIS CONCLUDES THE ASSEMBLY OF THE 807 BODYSYSTEM WORKOUT CENTER MAINTENANCE Thank you for purchasing the ParaBody 807 Gym System. NOTES: LIMITED WARRANTY