Leg Extension
Assembly Instructions
1.LOOSELY assemble the FRONT BRACE (1) and REAR BRACE (2) to the TOWER (3) using four M10 X 130mm BOLTS (4), eight 3/8" SAE WASH- ERS (5) and four M10 NYLOCK NUTS (6) as shown.
2Assemble the MAIN PIVOT FRAME (7) to the TOWER (3) using one HUB PLATE (8) (as shown), two M10 X 75mm BOLTS (9), four 3/8" SAE WASHERS (5) and two M10 NYLOCK NUTS (6) at the top of the MAIN PIVOT FRAME. Use one M10 X 70mm BOLT (10), two 3/8" SAE WASH- ERS (5) and one M10 NYLOCK NUTS (6) at the bottom of the MAIN PIVOT FRAME. Tighten the BOLTS and NUTS securely.
3.LOOSELY assemble the SEAT FRAME (11) to the FRONT BRACE (1) and REAR BRACE (2) using four M10 X 90mm BOLTS (12), eight 3/8" SAE WASHERS (5) and four M10 NYLOCK NUTS (6) as shown.
4.LOOSELY assemble the TOP BRACE (13) to the SEAT FRAME (11) and TOWER (3) using two M10 X 35mm BOLTS (14), four 3/8" SAE WASH- ERS (5) and two M10 NYLOCK NUTS (6) at the SEAT FRAME and two M10 X 70mm BOLTS (10), four 3/8" SAE WASHERS (5) and two M10 NYLOCK NUTS (6) at the TOWER as shown.
5.Tighten all BOLTS and NUTS securely.
6.Assemble the LEFT HANDLE (15) to the SEAT FRAME (11) using two M10 X 35mm BOLTS (14), four 3/8" SAE WASH- ERS (5) and two M10 NYLOCK NUTS (6). Tighten the BOLTS and NUTS securely.
Repeat for the RIGHT HANDLE (16).
