Step 11
After placing the Lifecycle bike in the intended location for use, check the stability of the bike.
If the bike is not stable, rotate the FOOT (G) in the STABILIZER BAR (#7) that appears to be higher until the Lifecycle bike is stable.
Secure the position of the FOOT by tightening the LOCKNUT with an open- end wrench.
PRE-OPERATION CHECKLIST
4Insure that the STABILIZER BAR and HANDLEBAR BOLTS are tight.
4Make sure the exercise bike is properly leveled and stable.
Before attempting to operate your Lifecycle 8500 exercise bike, it is imperative that you familiarize yourself with the contents of the Operation Manual. If your exercise bike does not respond as described in the OPERATION MANUAL contact the nearest Life Fitness Service Center as listed in the OPERATION MANUAL.
Copyright 1997 Brunswick Corporation. All rights reserved. Life Fitness and Lifecycle are trademarks of Brunswick Corporation.
8/97
