FIGURE 8

 

 

 

4

 

 

9

 

 

4

 

 

10

 

 

3/8 X 3-3/4” 18

 

 

 

4

21

 

1

 

12

 

 

24

7

 

 

3

 

3

 

10

 

 

4

 

16

13

 

 

 

3

2

 

 

 

 

DETAIL 8

STEP 8:

LOOSELY assemble one RIGHT & one LEFT ADJUSTMENT RACK (9 & 10) to the REAR UPRIGHTS (4) as shown, using eight 3/8 X 3-3/4” FLAT HEAD BOLTS (18), eight 3/8” INT TOOTH LOCK WASHERS (21) and eight 3/8” LOCK NUTS (24). See FIG- URE 8.

LOOSELY assemble one RIGHT & one LEFT 42-1/4” ADJUSTMENT RACK (7 & 16) to the FRONT UPRIGHTS (3) as shown, using six 3/8 X 3-3/4” FLAT HEAD BOLTS (18), six 3/8” INT TOOTH LOCK WASHERS (21) and six 3/8” LOCK NUTS (24). See FIGURE8.

SETTINGADJUSTMENTRACKWIDTH(SEEDETAIL8)

Before tightening the ADJUSTMENT RACKS (9 & 10) AND THE 42-1/4” ADJUSTMENT RACKS (7 & 16), slide the LEFT and RIGHT BAR SUPPORTS (12 & 13) over the ADJUSTMENT RACK and REAR UPRIGHT. Assemble one BAR SUPPORT close to the top and the other close to the bottom, as shown in DETAIL 8. (Make sure not to cover any bolt heads.) Proceed to tighten all

four bolts in the order shown in DETAIL 8. Repeat this step on the remaining 42-1/4” ADJUSTMENT RACKS.

11

Page 11
Image 11
Life Fitness OHDMR manual Detail