PLATINUM CLUB SERIES TREADMILL | PCST-XXXXX-02 |
Cables | S/N PST100000 and up |
AK26-00348-0000 – Qty. 2 – Green and yellow ground wire with spade lug on one end and ring terminal on the other. One goes from the IEC connector to the frame and the other from the line filter to the frame.
AK32-00160-0000 - Qty. 1 – External Power cable with ferrite.
AK65-00062-0000 – Qty. 1 – RG6 Coax cable 75”
AK58-00034-0001 – Qty. 1 – Main Power cable from DSP to Console
AK58-00224-0001 – Qty. 1 – Mov Filter cable has a two pin connector on one end and a terminal on the end of one green wire and two spade lugs at the end of a varistor spliced to the other green wire.
AK58-00263-0000 – Qty. 1 – Hi-Pot Jumper cable is a two pin connector with a green wire looped between both pins.
AK65-00043-0001 – Qty. 1 – Cable from MIB in console to Activity Zone
AK65-00047-0000 – Qty. 1 – Heart Rate Ergo Bar cable
AK65-00051-0000 – Qty. 1 – 20” C-Safe cable. From splitter to console.
AK65-00051-0001 – Qty. 1 – 65” C-Safe upright cable. Runs from the base to the splitter in the bridge assembly.
AK65-00073-0000 – Qty. 1 – Cable Assy: Power DSP (Dom. Low Voltage units only)
AK65-00073-0001 – Qty. 1 – Cable Assy: Power DSP; High Voltage (Domestic)
AK65-00073-0002 – Qty. 1 - Cable Assy: Power DSP; High Voltage (International)
AK65-00074-0000 – Qty. 1 – Home switch cable from home switch to Motor Controller.
AK65-00081-0000 – Qty. 1 – AC power cable with an IEC connector on one end and a ring terminal on the Green/Yellow wire and spade lugs on the brown and blue wires.
23
