SM10 Unpacking & Assembly Instructions

ASSEMBLY

Figure 1 shows an assembled SM10.

Figure 1. SM10 main components.

1.Place the weight cell in its final resting spot.

2.Bolt on the top tube using a 5/8” socket with extension and combination wrench using two 7/16” x 5” bolts, 7/16” washers, and 7/16” nuts, end cap washers and end caps. You may wish to use a pinch bar to align the bolt holes.

Figure 2. Bolt on the top tube.

3

Page 3
Image 3
Life Fitness manual Assembly, Shows an assembled SM10