Lifebreath dimensions Model 195ECM, Performance, Engineering Data, DIMENSIONS 195ECM inches mm

Model 195ECM

ENGINEERING DATA

THERMALLY CONDUCTIVE, PATENTED ALUMINUM CORE

The cross-flow heat recovery core transfers heat between the two airstreams. The two cores are arranged for highly efficient counter current airflow.

MOTORS AND BLOWERS

Each air stream has one centrifugal blower driven by a common ECM motor. 5 speed fan operation. 120 VAC, 1.4 Amps.

FILTERS

Washable air filters in exhaust and supply air streams.

MOUNTING THE HRV

Four threaded inserts at corners of case designed to accept four reinforced polyester straps that are supplied with the unit.

DEFROST

Damper defrost system.

DEHUMIDISTAT

Adjustable Internal Dehumidistat.

CASE

Twenty gauge prepainted galvanized steel (G60) for superior corrosion resistance. Insulated to prevent exterior condensation. Drain connections 2 - 1/2" (12 mm) OD.

CONTROLS

ControlAir 15 - Standby/ON mode, 20 ON/ 40 OFF mode (each mode has 5 speeds). Control pad can be removed from HRV and remotely mounted.

Weight 106 lbs. (48 kg) Shipping Weight 108 lbs. (49 kg)

OPTIONAL MAIN CONTROLS

99-350 Lifestyle Ventilation Control 7/24 programmable ventilation, (3 wire) 20 gauge wire (min.) 100’ length

99-109 Air Sentry Air Quality Monitor designed to accept remotely mounted Control Pad, (3 wire) 20 gauge wire (min.) 100’ length

99-250 Ventilation Dehumidistat designed to accept remotely mounted Control Pad, (4 wire) 20 gauge wire (min.) 100’ length

OPTIONAL TIMERS

99-104 Digital Electronic Timer - initiates high speed ventilation for 20, 40 or 60 minutes, (3 wire) 20 gauge wire (min.) 100’ length

99-101 Crank Timer - Initiates high speed ventilation for up to 60 minutes, (2 wire) 20 gauge wire (min.) 100’ length

OPTIONAL ACCESSORIES

99-163 Duct Heater w/ Electronic SCR Thermostat, 1 Kw, 6” (150 mm) 99-164 Duct Heater w/ Electronic SCR Thermostat, 2 Kw, 6” (150 mm)

99-185 Weatherhoods, Two - 6” (150 mm) c/w 1/4” (6 mm) mesh screen

WARRANTY

Units carry a LIFETIME warranty on the heat recovery core and a 5 year replacement parts warranty.

DIMENSIONS 195ECM inches (mm)
METAL CLASPS		FILTER	MOTOR
STALE AIR			STALE AIR
TO OUTSIDE			FROM INSIDE
Por ts			Por ts	19"	(483)
6" (150 mm)			7" (178 mm)
FILTER			BLOWERS
FRESH AIR			FRESH AIR
FROM OUTSIDE			TO INSIDE
DEFROST		49 "			14 3/4"
DAMPER	CONDENSATE	(1245)
					(375)
DEFROST AIR	DRAINS		*NOTE: Front clearance of 25 inches (635 mm)
FROM INSIDE			is recommended for ser vicing unit.

Performance

Net supply air flow in cfm (L/s) against external static pressure

	E.S.P
(external static pressure)			[cfm (L/s)]
@ 0.1"	(25 Pa)		171 (81)
@ 0.2"	(50 Pa)		164 (77)
@ 0.3"	(75 Pa)		156 (74)
@ 0.4"	(100 Pa)		143 (67)
@ 0.5"	(125 Pa)		134 (63)
@ 0.6"	(150 Pa)		126 (59)
@ 0.7"	(175 Pa)		119 (56)
Max. Temperature Recovery			88%
Sensible Effectiveness
@ 114 cfm (54 L/s)		32°F (0°C)	88%
*Sensible Efficiency
@ 114 cfm (54 L/s)		32°F (0°C)	81%
*Sensible Efficiency
@ 119 cfm (56 L/s)		-13°F (-25°C)	77%
VAC @ 60HZ			120
WATTS / Low speed			34
WATTS / High speed			95
Amp rating			1.4

*Sensible Efficiency – thermal **Latent Efficiency – moisture

Note: Effectiveness - based on temp. differential between the 2 airstreams Efficiency – takes into account all power inputs

	220
	200
	180
)	160
(cfm	140
Flow	120
Air	100
	80
	60
	40
	20
	0	0.1	0.2	0.3	0.4	0.5	0.6	0.7	0.8

Static Pressure (in w.g.)

All units conform to

CSA and UL standards.

ATTENTION

The ECM motor produces a tone that some may find objectionable. We recommend the installation of the optional 99-SILENCER6 on the ‘Stale Air from Inside’ and ‘Fresh Air to Inside’ ducts.

Date: ___________________________________________	Contractor: ______________________________________
Tag: _____________________Qty:___________________	Supplier: ________________________________________
Project: _________________________________________	Quote#: _________________________________________
Engineer: _______________________________________	Submitted by: ____________________________________

TI-195ECM