TESTING
Getting a Drop of Blood.
IMPORTANT: Getting an adequate drop of blood is one of the most important steps in getting an accurate result.
CAUTION: To reduce the chance of infection:
■Never share a lancet with another person.
■Always use a new, sterile LifeScan Lancet. Lancets are for single
use only.
■Do not use lancet if protective disk has been removed or damaged.
■The Penlet® Plus Sampler should be used by only one person.
■Avoid getting hand lotion, oils, dirt, or debris in or on the lancets and the Penlet Plus Sampler.
■For assistance, call the LifeScan Customer Care Line at 1 800
Step 1: Insert a Lancet into the Penlet® Plus Adjustable Blood Sampler.
Remove the Penlet® Plus Cap by twisting it counterclockwise. Insert a lancet into the lancet holder. Push down firmly until the lancet is fully seated in the holder. Do not twist the lancet. To avoid contamination and to prevent the cap from rolling away, set the cap down on a flat surface with its small hole pointing up.
20