LifeSource UA-851 manual ? What Display Symbols Mean, Display Condition/Cause Recommended, Action

Models: UA-851

1 27
Download 27 pages 56.47 Kb
Page 5
Image 5

?WHAT DISPLAY SYMBOLS MEAN

Display/

Condition/Cause

Recommended

Symbol

Action

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The symbol shown while measure-

Measurement is in progress,

 

 

 

 

 

 

ment is in progress. It blinks while

 

 

 

 

 

 

remain as still as possible.

 

 

 

 

 

 

detecting the pulse.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

An irregular heartbeat or body

 

 

 

 

 

 

 

movement may have occurred.

Take measurement again and

 

 

 

 

 

 

Refer to page E-11 for more infor-

 

 

 

 

 

 

consult with your physician.

 

 

 

 

 

 

mation on irregular heartbeats.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Previous measurement stored in

 

 

 

 

 

 

 

MEMORY.

 

 

 

 

 

 

 

The battery power indicator during

Replace all batteries with new

 

 

 

 

 

 

 

 

 

 

 

 

measurement.

 

Battery Full

 

 

 

 

 

 

 

ones when the symbol blinks.

 

 

 

 

 

 

The batteries are low when it

 

 

 

 

 

 

Alkaline batteries recommended.

 

 

 

 

 

 

blinks.

 

Battery Low

 

 

 

 

 

 

 

Unstable blood pressure due to

Try the measurement again.

 

 

 

 

 

 

excessive body movement.

Remain very still during the

 

 

 

 

 

 

 

measurement.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The systolic and diastolic values are

Fasten the cuff correctly, and try

 

 

 

 

 

 

within 10 mmHg of each other.

 

 

 

 

 

 

the measurement again.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The pressure value did not increase

Check for air leaks along the

 

 

 

 

 

 

during inflation.

tube and around the air socket.

 

 

 

 

 

 

The cuff is not fastened correctly.

Refasten the cuff and retake mea-

 

 

 

 

 

 

 

surement.

 

 

 

 

 

 

There is an air leak in the cuff or

Make sure tube is properly con-

 

 

 

 

 

 

monitor.

nected to cuff and monitor.

 

 

 

 

 

 

 

Try the measurement again.

 

 

 

 

 

 

The pulse is not detected correctly.

Remain very still during the

PULSE DISPLAY ERROR

 

measurement.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Cuff Inflation Meter

Measurement is in progress,

 

 

 

 

 

 

remain as still as possible.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Pressure Rating Indicator™

Refer to the section “About

 

 

 

 

 

 

 

 

 

 

 

 

Pressure Rating Indicator” for

 

 

 

 

 

 

 

 

 

 

 

 

 

further explanation.

 

 

 

 

 

 

 

 

E-2 ?

LifeSource Health Line (Toll-Free): 1-888-726-9966

Page 5
Image 5
LifeSource UA-851 manual ? What Display Symbols Mean, Display Condition/Cause Recommended, Action