Step 2: Handlebar Assembly
A.Rotate the handlebars down so they are positioned on top of the handlebar posts. Secure the right and left handlebars to the support post using the 2 M8 x70L screws (B) provided in the hardware bag.
Note: Make sure that the wires on both sides are not pinched
B.Rotate the console bracket (8) up in the back until it reaches its normal operating position. This will cause the console support tube to rotate in the frame.
C.Place the left outside handlebar cover (9) next to the inside handlebar cover
allowing the plastic ridge to sit in the groove of the blue rubber ring. Secure these three parts together using the
Repeat this process on the other side with the right outside handlebar cover (10).
10 
8
B
9
C
blue rubber ring
X
