YOUR ENVIRONIZER:

Exit Grille

Top Cover Release Button

Top Cover

Collector Rod

SET-UP:

Select a firm, level and flat location. For proper air flow, locate the unit at least 3 feet (1 M) from any wall or furniture.

Ensure the exit grill faces away from the closest wall or furniture.

Ensure no grilles are blocked.

Plug into a grounded 120V outlet. See

IMPORTANT SAFETY INSTRUCTIONS.

Do not lift the Environizerby the Top Cover. Use the Handle in the top rear of the main housing.

OPERATION: SPEED LEVEL

Speed Level Buttons

Low, Medium, Super

UV Lamps

NOTE:

The ionizing process used by the Environizerproduces small amounts of ozone as a by- product. The Environizercomplies with U.S. Government limits for acceptable levels of ozone (less than 50 parts per billion by volume of air circulating through the product). People with a history of respiratory problems or heart/lung disease should consult a physician prior to using this product.

Power Button

Ensure the Collector Rod is firmly seated in place and the top cover is securely latched. The Collector Rod is keyed and will only seat properly in one direction.

Press the Power Button to turn the Environizeron. The unit will automatically start at Medium speed.

Select a speed level by pressing one of three Speed Level Buttons (Super, Medium, Low). The indicator light above the selected button will illuminate.

Press the Power Button again to turn-off the Environizer.

2