CLEANING THE COLLECTOR ROD:

We recommend using LifeWise Cleaning Cloths (Model 63-1513) to help gently clean the collector rod so your Environizer™ unit can continue to perform as intended.

When using the LifeWise Cleaning Cloths, always ensure that the collector rod is completely dry before reinserting into the Environizer™ unit.

For common household particles:

Remove the Collector Rod as described above.

Use a soft, damp cloth to wipe the surface of the Collector Rod.

Ensure that the Collector Rod is completely dry.

Insert the Collector Rod back into the unit.

Clean the Collector Rod every 2-3 weeks, sooner if needed.

For tobacco smoke or particles that are not easily removed:

Remove the Collector Rod as described above.

Use a scrub sponge dampened with a mild soap and water solution and wipe the Collector Rod from top to bottom.

Wipe down the Collector Rod with a damp cloth and insure that no soap residue remains on the Collector Rod and it is completely dry. (Do not place under running water to rinse.)

Insert the Collector Rod back into the unit.

Clean the Collector Rod every week, sooner if needed.

Your Environizermay experience some discoloration on the Collector Rod over time. This is normal and does not affect the performance of the product in any way.

CLEANING AND MAINTENANCE:

The Environizershould be cleaned at least once every three weeks. More frequent cleaning may be required depending upon environmental conditions.

Turn-off and unplug the Environizer.

Press the control panel release button and rotate the Top Cover up.

Remove and clean the collector rod as previously described.

Turn the unit upside-down 2 or 3 times and hold for at least 3 seconds each time. This allows the cleaning bars inside the unit to scrape any accumulated debris off the electrostatic wires. Note: Do not stick any foreign objects or your fingers inside the unit.

Use a clean, dry cloth to wipe the external surfaces of the Environizer. DO NOT USE

WATER, GASOLINE, POLISH, OR ANY CHEMICAL SOLUTION.

REPLACING THE DUAL UV LAMPS

Be sure to turn off and unplug your EnvironizerAir Purifier.

Press the Control Panel Release Button and rotate the Top Cover back.

Locate the left bulb and turn the arrow towards the unlock symbol so it is horizontal and facing 3 o’clock.

Gently grasp the top of the arrow and pull the bulb housing straight out of the UV socket. Do not touch the bulb directly with your hands.

Do the same for the right bulb and turn the arrow towards the unlock symbol so it is horizontal and facing 9 o’clock.

4